TPG Community

Ask, answer and talk about our products

How to set up your NBN service with TP-Link VR1600v modem

Community Manager

TP-Link VR1600v modem

NBN service setup and and modem configuration

 

This article provides modem setup advice for NBN services (excluding NBN FTTP) to get you up and running in just a few simple steps;

 

  • Physical setup
  • Wait for NBN activation
  • Manual Modem Setup (if required)
  • For NBN FTTN/NBN FTTB
  • For NBN HFC & NBN Fixed Wireless
  • Wi-Fi Setup

For full modem guides for all TPG-supplied NBN modems, visit https://www.tpg.com.au/support/nbn/setup/modem_guides

 

Modem physical setup

 

image.png

 

1. Depending on your NBN connection type, connect one of the following;

  • 1a. If there is no NBN Connection Box installed, Connect the DSL port on the back of your router to your phone wall socket
  • 1b. If there is an NBN Connection Box installed, Connect the WAN port on the back of your router to your NBN Connection Box

 

2. Connect the Phone 1 port on the back of your router to your telephone handset

 

3. Connect any of the 4 LAN ports on the back of your router to your PC

 

4. Connect the Power port on the back of your router to your power socket

 

Wait for NBN activation

 

Note: If you get your modem from TPG, you are not required to configure your modem as all necessary settings will be pushed to your modem automatically.

 

 image.png

 

Once you receive confirmation from TPG that your NBN service is active, turn on your router and leave it for up to 30 minutes as your router is retrieving and saving the required settings from TPG to connect automatically. When this is completed, the Internet light on the front of your router will become solid green.

 

Manually configuring modem (If required)

 

Note: If you get your modem from TPG, you are not required to configure your modem as all necessary settings will be pushed to your modem automatically. The instructions below can be used in case you need to manually configure your modem.

 

For NBN FTTN & NBN FTTB

 

 

 

1.pngA. Open your browser and in the address bar type http://192.168.1.1 and press Enter 

B. Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

 

 

 

 

 

2.pngC. You will see the home screen shown on the right. Click the Advanced tab. 

 

 

 

 

 

 

3.pngD. On the menu on the left side of the page,

 click Network to expand the menu and then click DSL.

 

 

 

 

 

 

4.pngE. Click the Edit button on pppoe_ptm_2_0_d. 

 

 

 

 

 

 

5.pngF. Enter your TPG Username and Password. Click Save

 

 

 

 

 

 

 

6.png G.  Click the Basic tab                 

 

 

 

 

 

 

 

 

7.pngH. On the menu on the left side of the page, click Wireless.  

 

 

 

 

 

 

 

 

I. You can change your Wi-Fi details or keep the default settings. The default Wi-Fi SSID (network name) is WiFi-xxxx (xxxx is a random 4 digit alphanumeric code printed on the sticker underneath your modem). By default, the Wi-Fi password is printed on a sticker underneath your modem (Wireless Password/Key). Click Save

 

 

Setup complete!

 

For NBN HFC & NBN Fixed Wireless

 

 

8.pngA. Open your browser and in the address bar type http://192.168.1.1 and press Enter. 

B. Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface. 

 

 

 

 

9.pngC. You will see the home screen shown on the right. Click the Advanced tab.

 

 

 

 

 

 

10.pngD. On the menu on the left side of the page, click Network to expand the menu and then click EWAN

 

 

 

 

 

 

11.pngE. Enter your TPG Username and Password. Click Save

 

 

 

 

 

 

 

12.png F. Click the Basic tab. 

 

 

 

 

 

  

 

12.pngG. On the menu on the left side of the page, click Wireless

 

 

 

 

 

 

 

13.png I. You can change your Wi-Fi details or keep the default settings. The default Wi-Fi SSID (network name) is WiFi-xxxx (xxxx is a random 4 digit alphanumeric code printed on the sticker underneath your modem). By default, the Wi-Fi password is printed on a sticker underneath your modem (Wireless Password/Key). Click Save

 

Setup complete!

 

Wi-Fi setup

 

Note: If you get your modem from TPG, you are not required to configure your modem as all necessary settings will be pushed to your modem automatically.

 

1. Make sure that wireless (Wi-Fi) is enabled on your devices.

 

2. Using your wireless device, scan the wireless networks and select the network called WiFi-XXXX (XXXX is a random 4 digit alpha numeric code). You can also select the network WiFi-XXXX-5G if you wish to connect to 5GHz network which offers faster Wi-Fi speed (if your device supports it).

3. Enter the Security Key. By default, the security key can be found printed on the barcode sticker on the underside of the router. 

 

image.png