Can someone please help , I am trying to connect new router to Archer 1600 v supplied TPG modem/router. I am connected to FTTB ( not NBN) . I coonect Router to WAN port , but cant get router to connect to internet although internet is working normally. Not sure if it PPPoE and if so where do i get Password from , or DYnamic connection. Would really appreciate any help here . As there is no telephone support around finding it challenging to get good advice . I assume it fairly straigh forwad if i new the steps
With FTTB use the DSL port on the VR1600 ( not the WAN port).
Try plugging in the line cord from the wall socket to the DSL port.
Here's some helpful info.
Read our TPG Community article on how to set up your NBN FTTB service. The video is followed by a step-by-step guide. Visit https://link.tpg.com.au/FTTN/B "
The Archer modem/router is working fine I want to add my own router . It not NBN connedction it TPG own FTTB in essence ADSL but just need to be able to get new router to talk to Supplied modem so i can get the internet to go thru new router