TPG Community

Get online support

My Uni-D1 light is still red

SOLVED Go to solution
tobethehero
Level 2
I have set up my router as the guide shown and made my NBN service active. After waiting for an afternoon, the Uni-D1 light and Internet light are still red.
1 ACCEPTED SOLUTION

Accepted Solutions
WayneR
Staff
Tobethehero

Uni-D 1 light cannot go red. If the opical light is red it's a fault or outage. If the uni-d light is not lit and the light from the optical can be seen then refer to my comment above

Uni D lights turn green or amber based on the Ethernet connection you connect. Green 10/100 and Amber is GigE 100/1000. I found a handy link that explains the light colours to you that can be found here https://iihelp.iinet.net.au/NBN_FTTP_Connection_Box_Status_Lights

Good luck

Wayne

View solution in original post

2 REPLIES 2
KarenC
Moderator

Hi tobethehero,

 

How's your connection? You may refer to this link if you are still having issues:

 

https://tpg.com.au/support/nbn/problems_connect_internet_nbn

WayneR
Staff
Tobethehero

Uni-D 1 light cannot go red. If the opical light is red it's a fault or outage. If the uni-d light is not lit and the light from the optical can be seen then refer to my comment above

Uni D lights turn green or amber based on the Ethernet connection you connect. Green 10/100 and Amber is GigE 100/1000. I found a handy link that explains the light colours to you that can be found here https://iihelp.iinet.net.au/NBN_FTTP_Connection_Box_Status_Lights

Good luck

Wayne