TPG Community

Get online support

Voip Settings for VDSL

Highlighted
Level 1c

Has anyone tried connecting a switch to the nbn box and connecting it to WAN ports on your own router and the tpg router? The idea is that both routers work as independent modems and have a direct connection to the NBN.

 

That setup apparently works with Optus VoIP, whereas other setups like connecting one router to the other do not. You'd have to set a static IP on the TPG router, turn off the DHCP and point the Gateway to the other router.

Level 1c

I've got a HFC NBN connection and the following setup lets me use both my BYO router as well as the VoIP phone.

 

I've put in a network switch (cost under $20) between the NBN Box and the routers. The NBN Box is connected to the switch. The switch is connected to the WAN port of the BYO router, and the switch is connected to the WAN port of the TPG router.

 

I haven't changed any settings in either router. They both have their normal IP addresses and both are running DHCP.

 

The effect is that you're running two independent LANs. The BYO router runs my main network and my WiFi. The TPG modem runs the phone connection. I've switched off the WiFi on the TPG modem as I don't need another WiFi network in the house, but that is a personal choice. In fact, if you put the TPG modem in a different part of the house another WiFi network may be useful. You can connect other devices to the TPG router to access the internet as well as each other, but they won't be able to communicate with the devices connected to the LAN on the BYO router.

 

Hope this helps.

Highlighted
Level 3
Level 3

Hi @marius,

 

The only way I can see this working is if TPG supplies 2 public IP addresses, one to each router respectively.  If that's the case, then awesome - this is a great solution, and avoids the double NAT issues that will plague users who are trying to publish services from their premises, etc.

 

Can anyone else confirm if they have had success using this method?

Highlighted
Level 1c

@cn 

 

The setup with a switch in front of 2 independent routers worked for me. I didn't have any extra public IP addresses or organise any special setup with TPG. Both routers had an internet connection, and the TPG router had a phone connection. I didn't run any other services.

 

However after a while I changed the setup. (I moved the TPG router to a location away from the NBN box  to use more of the existing ethernet wiring in the house for the main network, rather than run another cable).

 

The current setup is as follows:

NBN box to WAN port of Netgear Router

Netgear Router LAN port to WAN port of TPG Router

Phone connected to TPG Router

Both routers have internet connections and indepenent networks.

I use the Netgear Router for the main network.

(I put a switch in between the Netgear and TPG Routers to connect more things to the main network and minimise the cable run for the TPG network, but that's a personal preference due to the locations of the existing ethernet sockets in the house).

 

Marius

Highlighted
Level 3
Level 3

Wow, that's even more confusing, as everyone seems to say that unless the TPG-supplied router is connected directly to the NBN modem, VOIP services will NOT work.  You are describing a double-NAT setup with a working VOIP service.

 

I will be getting my TPG equipment delivered tomorrow so I will definitely be having a play.

Highlighted
Level 3
Level 3

I can confirm this setup works for TPG.  I have my own router and TPG's TP-Link router both connected to the NBN modem via a standard 5 port gigabit switch and TPG.  Both connect using PPPoE and TPG give each router its own public IP address.  I use the TP-Link router solely for VOIP (which works perfectly) and my own router for everything else.  Thanks for the tip @marius!

 

cn.