Tp-link archer Vr1600v compatible for adsl2+?

[varun3001]

I have NBN modem of tp-link Archer VR1600v. I was wondering if this modem is compatible with adsl 2+?

[Ken-C]

Hi there             

 Welcome to the community,

Could you please send me a PM (private message) with your CID (customer identication number) or your mobile phone number so can look at this service for you 

kind regards

[Ken-C]

HI there varun3001,

Welcome to the community,

Yes the TPLink Archer VR1600v is a hybrid and among other things it is ADSL2+ compatable 

For further help with setup and configuration i have listed the steps below to assist you to do this.

Firstly make sure you have connected your device to the modem via wired (ethernet) or WIFI.

A. Open your browser and in the address bar type http://192.168.1.1 and press Enter.

B. Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

C. You will see the home screen shown on the right. Click the Advanced tab.

D. On the menu on the left side of the page, click Network to expand the menu and then click DSL. Then click on edit icon in the 2nd little blue box below under modify..

E. Enter your TPG Username and Password. Click Save

If you have any further questions or concerns please let me know,

Kind regards 

[varun3001 · Accepted solution]

I did all the steps you mentioned but still my wifi is not working.