Did you go through this discussion. It has already been solved here: https://community.tpg.com.au/t5/NBN-Installation/FTTC-NCD-not-connecting-flashing-lights/td-p/37391
Hope this helps!
Thanks fmw333, looks like the issue is that the service is not active yet even though I received an SMS that led me to think it was.
So, at this point I'm just waiting for the service to be activated.
Hi there joaquincoelho,
Yes your installation is still progressing but given the activation messages it really should be working now, could you please confirm with me you have removed the ADSL modem and setup and and connected your NBN FTTC equipment again for at least 30mins since we last spoke and is there any change?
Regardless so i can do some further diagnostics, if you havent already done so could you be so kind as to please plug in and setup your NBN FTTC equipment once again and let me know once this is done and if there is any change in the blue lights on the NCD white NBN box please.
Please let me know
Thansk for your reply. The SMS was actually received yesterday and I tried plugging the NCD a couple of hours after receiving it, nothing changed. I let it work for about 20 minutes and the lights were still flashing after that.
ADSL is still working which is confusing since looks like TPG is waiting for me to complete the activation. Not sure what to believe, the website that says activation is in progress or the SMS?
Hope you are doing well and thanks for your help, the NBN technician came today and my NBN connection is now working.
On the other side, I would like to use my D-Link DSL-2888A router and I have tried different things to make it work...no joy so far.
Not sure if you can help me with this but these are the settings I'm trying:
WAN Acces Type = VDSL
Interface = PTM 0
VLAN Tagged = Enabled
VLAN ID = 2
VLAN Priority = Disable
Service Type = INTERNET
My Internet Connection is = PPPoE
Username: The one I use to access my TPG account (I guess this is the one I should use???)
Password: The one I use to access my TPG account (I guess this is the one I should use???)
Any thoughts? Thanks.