Thought I would share as I also came here for the answer and then figured it out myself.    After setting up PPPoE connection go to Advanced Setup/VLAN/Bridge Settings: 1. Enable VLAN/Bridge Group 2. Choose By VLAN tag group 3. choose automatically created VLAN group(VLAN ID 10) and click edit  4. Change VLAN ID from 10 to 2 5. Click Apply (in my case it was doing a kind of 'jump' to the main VLAN page and wasnt "really" applying it properly) 6. Next make sure you tick "Enable VLAN/Bridge Settings" (as it was somehow unticked again after previous step) 7.again make sure "By VLAN Group" is selected 8. and there is only one VLAN Group with VLAN ID 2 and all the ports belong to it.  9. Click Apply (this time it should reboot the wifi router, without reboot VLAN settings are not applied even tho it shows otherwise)   Hope this helps     ... View more