Just sharing this Linksys X6200 Set up guide for NBN FTTN/FTTB. Step 1: Connect the Linksys X6200 on the wall socket with a phone cable to the ADSL port of the Linksys X6200   Step 2: Access the Linksys X6200’s web-based setup page The default address is 192.168.1.1     Step 3: On the Tabs on top click on Setup > Basic Setup.     Step 4: Under Physical Setting, set the Physical Type to DSL and the DSL Mode to PTM.     Step 5: Tick Enable VLAN and use number 2 on the VLAN ID     Step 6: Under Internet Setup, set the Internet Connection Type to PPPoE, then enter your TPG Username and TPG Password and use Keep Alive then Save the settings       ... View more