Hi, I am having problem setting up my new eero 6+ modem, I did the following steps but no results, please help. 1. I pluged the Eero 6+ into the VR1600v to update the Eero software to v7.1.1-16 (support PPPoE) 2. Set up a brige on the VR1600v by using provided resource, I also deleted the old EWAN (with VLAN ID 2) to make this work  a. Select on "Network"  b. Click on "DSL"  c. Then click on "+Add" to create a new connection  d. Make sure to select on "VDSL"  e. Look for "Bridge" on the "Internet Connection Type"  f. "Enable" the VLAN ID  g. VLAN ID should be "2"  h. Lastly, "Save" the changes 3. I used the eero app to change the WAN type from DHCP to PPPoE , I only put in the PPPoe user name (xxxxxx@tpg(dot)com(dot)au, no password), then clicked Save settings 4. Turned the Uplink VLAN on, input "2", then clicked Apply settings 5. I then power off the VR1600v, connect the eero 6+ directly to the NBN black box but no internet connection   Did I do anything wrong? Any input will be great Thanks   ... View more