Configuration

acharyasujan12
Level 2
Need help in setting up a new modem router (TPLink ArcherVR2100). I have lodged a fault report yesterday and yet to receive a response.
1 REPLY 1
david64
Level 14

@acharyasujan12 . Taking this from the VR2100 manual.

Ethernet cable from NBN box goes to LAN4/WAN port.

If FTTB/N, telephone cable goes from wall socket to DSL port.

 

In the following, VLAN ID is not used with FTTP connection.

Internet Connection Setup screen:

DSL modulation type is VDSL

VLAN ID enable

VLAN ID = 2

Internet Connection Type is PPPoE

Enter TPG username with @tpg.com.au and password

Save.