@adsllgwe . WPS has to be enabled in router config but the Save function doesn't turn the light on.
Make a connection from the device side.
1. Tap the WPS icon on the device’s screen.
2. Immediately press the WPS button on your Archer.
3. The WPS LED flashes for about two minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the Archer.
Make a connection from the router side.
1. Press the WPS button of the Archer for 1 second (if doesn't work, try 5 seconds).
2. Press the WPS button of the client device directly.
3. The WPS LED flashes for about 2 minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the Archer.
