Blocking WIFI and Lan access on my Archer modem

[beaverbear1]

I have tried all the correct procedures/instructions to block access to WIFI and LAN on my modem in Parental Controls and it doesnt work, shows they are enabled but my kids still continue to get access. Anyone have any ideas or have I missed something. Thanks

[David_M · Accepted solution]

Hi @beaverbear1 

Welcome to the community!

We have an existing thread about on how to setup the Parental Control using TP-Link vr1600. You may visit the link below.

https://community.tpg.com.au/t5/Broadband-Internet/Archer-VR1600v-Parental-Control/td-p/33195

Let us know how it will go and should you require further assistance.

Cheers!

[beaverbear1]

David, I am stil checking to see if that works, now have another issue when I try block one of the numbers that I had previously blocked it now comes up with an error 4916 saying it is in use?, I have blocked other ones no problem.I reset modem to default settings but still the same issue. 

Thanks for your help

[Ahra_G]

Hi @beaverbear1, 

I would recommend then to contact TP Link's support directly so they provide the proper settings for the Parental Control. 

Regards,

Ahra_G