Get online support
Hi @Ngarangi01 . The default LAN ip address of router is 192.168.20.1.
In Basic Setup, select VDSL for FTTB/FTTN, or Ethernet WAN for FTTC/FTTP/HFC.
WAN mode is PPPoE.
Username + @tpg.com.au and password.
In the manual, VDSL has VLAN settings. It's not clear if the ethernet interface supports VLAN by default.
FTTP does not use VLAN ID.
In the user guide: Advanced Setup Layer2 Interface
You might be able to add a WAN service with 802.1p priority = 0, and 802.1q VLAN ID=2.
If you have the device, get the user guide from the internet. It explains more.