TPG Community

Get online support

ASUS RT-AX82U router setting

cwu23458
Level 2
 
12 REPLIES 12
david64
Master

Hi @cwu23458 . Settings are PPPoE, TPG username and password. This should be enough for FTTP.

For FTTC and HFC, you need to set VLAN ID=2. This iiNet article describes setting for Asus RT AC68U which has similar menu structure to the AX82U. (Same for FTTC and HFC.)

https://help.iinet.net.au/how-set-asus-rt-ac68u-nbn-fttc

If you are on BYO data-only plan (no VOIP service), VLAN ID is not used.

cwu23458
Level 2

Thanks for your information. WIFI looks fine now, but my security system connect router directly and LAN is still not working....

david64
Master

@cwu23458 . Could you explain more. 

Do you have internet access now?

What is the issue with the security system?

Which LAN is not working?

cwu23458
Level 2
I follow the step and got internet access. Mobile and labtop had connected through wifi. But my desktop is using cable to connect router and doesn’t have internet...
cwu23458
Level 2
Please find attached. I use the cable connected router and desktop, it says no internet.
Thank you
david64
Master

@cwu23458 . Have you tried the desktop computer on all 4 LAN ports?

Do you have another ethernet cable?

Open a command window and do the command:       ipconfig /all

Copy and paste the ethernet details back here.

cwu23458
Level 2
I tried all LAN ports and Ethernet cable were works fine yesterday as i just got new router replace.
cwu23458
Level 2

I put old modem back now, LAN ports got internet.

david64
Master

@cwu23458 . Using the desktop, can you do the   ipconfig /all    command when the old router is connected and when the Asus is connected.