No internet light FTTN connection

[tauaafam0611]

We have tried the modem in the other wall socket and the DSL light now flashes consistently without stopping. However, still no internet light.

Technician left our house and said connection should be up within in 30mins.

[JayeshP9]

HI,

Now I am able to see your modem up so it might take little while to configure.

you can also see than now DSL is stable green.

regards

JayeshP9.

[JayeshP9 · Accepted solution]

Hi tauaafam0611,

I believe currently  modem is under auto-configuation but in case if you require to configure modem by manual configuration then follow below steps.

A. Open your browser and in the address bar type http://192.168.1.1 and press Enter

B. Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

C. You will see the home screen shown on the right. Click the Advanced tab.

D. On the menu on the left side of the page, click Network to expand the menu and then click DSL.

E. Click the Edit button on pppoe_ptm_2_0_d.

F. Enter your TPG Username and Password. Click Save

G.  Click the Basic tab  

H. On the menu on the left side of the page, click Wireless

I. You can change your Wi-Fi details or keep the default settings. The default Wi-Fi SSID (network name) is WiFi-xxxx (xxxx is a random 4 digit alphanumeric code printed on the sticker underneath your modem).
  By default, the Wi-Fi password is printed on a sticker underneath your modem (Wireless Password/Key). Click Save.

Setup complete!

see below link as well

https://community.tpg.com.au/t5/Modems-and-Devices/How-to-set-up-your-TP-Link-VR1600v-modem/m-p/709#...

regards

JayeshP9.

[tauaafam0611]

Thank you we are just rebooting and then I will follow your instructions for manual configuration below

Cheers