Yep, I can give different names to the 2.4GHz and 5.0GHz wifi bands on VX420 (confirmed in the past)   Yes, the VX420 wifi is currently disabled Yep, 1 Eero unit is connected to the VX420 via an ethernet cable. I don't know how to tell if it's the main unit unfortunately Yep, I tested the phone and doorbell on the VX420 wifi without the Eero in the past. It worked once out of roughly 10+ attempts. But when I tried replicating the success with the same modem router settings, it didn't work again 😢 My phone shows both the 2.4 and 5.0 WiFi bands from VX420 when I tested it in the past. Weirdly enough, the doorbell only showed 2.4 (no 5.0)  Regarding "Can you use your phone to check for surrounding wifi networks that might cause interference." This is what my phone shows This is what the doorbell setup shows Regarding "On the VX420, allocate a fixed ip address for the doorbell", is that only possible if the doorbell is connected to the modem router directly? Cause currently it's connected to the Eero, and the VX420 WiFi is disabled ... View more

I have a 3-pack Eero model numbr J010001. I bought it on https://www.amazon.com.au/dp/B085Q2ZF1X?ref_=pe_2361882_295287342_301_E_DDE_dt_1#tech If the setup's update is stuck at 0%, the setup won't complete. The result is my Google Home app has a doorbell that's perpetually offline. I can't see live video, change settings etc. So setup via Eero/modem router results in a doorbell that doesn't work The only way I've gotten doorbell online (and working) is by the following 1. Change mobile hotspot network name and password so it's the same as the Eero mesh WiFi 2. Turn off Eero 3. Complete doorbell setup on hotspot 4. Turn off hotspot + turn on Eero 5. Restart phone and doorbell Even with above method however, the connection between doorbell and phone is unstable. Sometimes the live video won't show even after waiting for 1 min. It also won't connect to talk and listen (which lets me talk into phone, and then my voice is projected by the doorbell). Which is why I'm wondering if there's a setting I can modify on the Eero/modem router that allows the doorbell's setup to complete the update without any issues All devices connected to the Eero WiFi has working access to the internet (no device is connected to the modem router currently) ... View more

I'm trying to set up a Google Nest Doorbell (battery), and I have both an Eero mesh WiFi, and the VX420-G2h modem router. During the initial setup, the doorbell gets updated. Here's the issue. When my phone and doorbell are connected to either the Eero or the router, the update is always stuck at 0%. Which stops my Google Home app from completing the setup But if the phone and doorbell are connected to a mobile hotspot during the setup, the update finishes instantly Would anyone know if there's some setting in the mesh WiFi or modem router that I can adjust so that the update isn't stuck at 0%? So far I've tried the following - Enable IPv6 - Disable IPv4 SPI Firewall - Disable IPv6 SPI Firewall - Port forward the doorbell  - Allow doorbell past IPv6 firewall Any help would be appreciated! ... View more

Sorry, just got another question. I'm trying to do the following "During setup, port 11095 is used to connect some Nest products to the app. If you're having trouble connecting your Nest product, you may need to temporarily unblock port 11095 in your Wi-Fi router's settings to finish setup" To unblock port 11095, is this what I do in NAT Forwarding > Port Triggering?   I had a few options for "Interface name" and wasn't sure which one to select In case it's relevant, this is what I have in Advanced > Network > EWAN   ... View more

Thanks a lot for that! 😃 ... View more

I don't think so.  Apparently, the wireless isolation setting "prevent devices on your network from connecting to other devices in your home". "Prevents users on a Wi-Fi network from reaching other devices in the same Wi-Fi network (SSID) as well as computers and servers in the wired network" I think wireless isolation setting is also called "client isolation," "AP isolation" and "SSID isolation" ... View more

Thanks for the reply Shane! Do you have any idea if my modem router has wireless isolation settings? ... View more