@david64 wrote:@iq455 . TPG won't roll back the firmware. I was wrong earlier when I said the FTTC box was warm after you said you are HFC. I don't know about the HFC box.
Where does the error 80002 show up during disconnection?
Thanks, David!
The error shows on the router page. Doesnt matter what page, it will display it when in the process of a DC, It's wierd, the DC is slow, like, 1 thing will go down for 20 seconds, then another site, then discord, or telegram, then netflix, then finally, the network adapter will show the yellow triangle and then everythings dead. When I look at the router page, w/e page it is on, that error code and box will be there. Then about a minute later, the connection comes back again. Also I've noticed, if nothing is running, the connection can stay up for a good while, As soon as we watch youtube or netflix, BOOM, it's dead.
@david64 wrote:@iq455 . TPG won't roll back the firmware. I was wrong earlier when I said the FTTC box was warm after you said you are HFC. I don't know about the HFC box.
Where does the error 80002 show up during disconnection?
Another thing to try. In router admin, Advanced, Network, EWAN. In the Advanced drop-down menu, set Echo Request Interval to 8. When you get a glitch, see if any of the router lights change.
Are you able to get the full system log after recovery when the traffic monitor is running? Save it on your computer, then copy and paste the section from just before disconnection to end of recovery back here.
You may need to open a new thread because a moderator may not look at this because it is a few days old.
Symptoms: Disconnection causing router to crash; has to be turned off/on to recover. "Glitches" dropouts lasting several seconds which recover themselves.
Your router has the latest firmware.
TPG is recording dropouts from their end. Your router is doing the same going by your picture of the system log.
It doesn't matter whether you have the domain name or not on your username.
Disconnect happens when router warms up but also when it is being cooled by the fan. When it happens, the router crashes because you can't ping its lan ip address. And you can't login to the router admin. Having the traffic monitor running seems to stop the router from crashing.
When glitch happens, you can't ping the router's default gateway. Points to something in the HFC network.
Or a faulty HFC box.
About the log, it's got mac addresses and IPs in ther that are private ones, can I leave those out? I know it's got a bunch of crap in there about VOIP, which I don't use..Almost like a DDoS of VOIP entries..
Im getting my new test router today, Ill see what happens with that. Also, the NBNcos Box, gets a little warm, never too hot though.
Thanks for al your help, I appreciate it a lot! 
ty
