TPG Community

Ask, answer and talk about our products

Setting up Tp-Link Archer VR600v modem for TPG voip telephone

SOLVED Go to solution
Level 2
Level 2

Hi, can anyone advise if the Tp-Link Archer VR600v (EU)  Ver 2.0 modem can be configured to enable TPG VOIP? I have TPG NBN connection (FTTN) and although when connecting the telephone (Uniden DECT 1735 series) there is a dial tone, no outgoing or incoming calls connect. (Incoming callers are advised that the phone service is not connected). The modem supplied by TPG (Tp-Link Archer VR1600 Ver 1.0) works ok, but in my house the VR600v seems to have a better WiFi coverage.

2 REPLIES
Level 6

Hi @AJ Only the TPG supplied modems will work with TPG's VOIP service, you could always use the supplied TPG modem for VOIP and wired ethernet only and configure the VR600v as just a wirless access point to handle all the WiFi.

Level 2
Level 2

Thank you for your reply.