TPG Community

Get online support

Connecting Telstra Gateway v7610 FTTP not working

davlap12
Level 2

Hi

 

As per heading
Followed FTTP guide plugged in WAN port from NBN box
Added TPG username and password

 

Anything else required ?

 

TPG VR1600 works fine, this is fw version am I up to date ?

Firmware Version: 0.1.0 0.9.1 v5006.0 Build 200810 Rel.53181n
Hardware Version: Archer VR1600v v1 00000000

Just having check on it all looking to boost rather than fix things

 

Cheers

6 REPLIES 6
Shane
Moderator

Hi, davlap12.

For FTTP if you wish to use 3rd party modem make sure that the connection mode of the modem is on PPPoE and using correct TPG username and password.

Note: Some of modem/router requires to use a domain (i.e @TPG.com.au or @telstra.com.au)

 

On the other hand, I can confirm that the VR1600's Firmware is up-to-date.

Regards,

 

Hi

 

As per heading
Followed FTTP guide plugged in WAN port from NBN box
Added TPG username and password

 

Anything else required ?

 

TPG VR1600 works fine, this is fw version am I up to date ?

Firmware Version: 0.1.0 0.9.1 v5006.0 Build 200810 Rel.53181n
Hardware Version: Archer VR1600v v1 00000000

 

Just having check on it all looking to boost rather than fix things

 

Cheers

davlap12
Level 2

Thanks for replying

 

The modem was set  to PPPoE and using correct TPG username and password.
There is nowhere to put the domain in. There is a service name I tried with TPG but didn't work

 

I have now set it up as a wifi router so it works OK with the vr1600 as the modem

Thanks for confirming the VR1600's Firmware is up-to-date.

 

 

david64
Level 15

@davlap12 . The domain is just    @tpg.com.au    added on to your username.

davlap12
Level 2
Thanks, tried change to username, still not connecting
Strange thing, of I save the settings they come back empty.
I restored from backup with username filled in
david64
Level 15

@davlap12 . Have you read the user manual?

In Internet setup, have you selected Use WAN Uplink Mode?

What is the state of the WAN and Internet lights?

Look at the WAN port on rear of router. What is the state of the indicator light?

 

davlap12
Level 2
yes, selected uplink mode (and tried off)
Internet light off, wan on
wan port light on, green I think
I had to go back to vr1600 so not currently connected
Manual is basic, should be straight forward, nothing to do other than what has been said here.