I am using the FTTB service. I connected my d-link router and tp-link modem, the router detected the internect connection and it worked fine for a while until the router updated its firmware and ask for the name of the ISP and whether they provided me a user name and passward (i supsect it is for the pppoe). I typed in my username and passward as provided (the same one i used to login my tpg account) and my internet since then would not go through the d-link router. I try to reset the router and make it ask less questions, but it seems that the firmware update is irreversable. Thanks for helping.
This white box is a AC1600 Wireless Dual Band Gigabit VoIP VDSL/ADSL Modem Router connected to the DSL port with the telephone cord. DSL light is on, internet light is on and WIFI light is on. Everything is working perfectly on the white box. No other box (or modem) is recieved from TPG.
Yes, I can acess the interenet if the device is connected to the Acrher's wifi. I want the archer to be the modem and connect to the black router so i can utilise the data processing on the new router.
Are you using the VOIP phone function with your NBN connection? If not, you could just use the black router by itself if it has the DSL telephone connector. If you do use the phone function, you need the Archer as the main router with the phone.
There's any number of articles on the internet describing how to connect two routers together. They vary slightly depending on your actual requirements. There are posts in community because several users are trying this. What is the model of the black router?
