TPG Community

Get online support

How to set up a bridge on archer vr1600v.

SOLVED Go to solution
Level 1

Just got the Archer vr1600v modem and trying to set up my old gateway as a bridge - managed to set it in bridge mode and connected to the WAN port of the Archer but have no clue how to actually set it up ... halp!

1 ACCEPTED SOLUTION

Accepted Solutions
Moderator

Hi @jimmyb,

 

Welcome to the community!

 

VoIP feature will not work if Archer vr1600v is on bridge mode. (It needs to be the Authenticating Device/ The device that needs to be connected directly to our TPG server)

 

Once you visited the modem's page.

- 192.168.1.1 go to 'Quick Setup' Tab
- Select 'Other' hit next.

Follow the settings below:

tplink.png
- Once it's done select 'Next' button

 

- Let us know how it will go.

 

Cheers! Smiley Happy

View solution in original post

49 REPLIES 49
Moderator

Hi @jimmyb,

 

Welcome to the community!

 

VoIP feature will not work if Archer vr1600v is on bridge mode. (It needs to be the Authenticating Device/ The device that needs to be connected directly to our TPG server)

 

Once you visited the modem's page.

- 192.168.1.1 go to 'Quick Setup' Tab
- Select 'Other' hit next.

Follow the settings below:

tplink.png
- Once it's done select 'Next' button

 

- Let us know how it will go.

 

Cheers! Smiley Happy

View solution in original post

Level 1b
Hi I’m trying to do this on the same modem I recently got archer vr1600v, I cannot see a quick setup and any other area to change to bridge mode, please help. Thanks
Moderator

Hi @Bruzza81,

 

Have you tried to follow up instruction above?

If yes, can you post a screen shot of your modem/router page.

 

I will have it checked. Smiley Happy

 

Cheers!

Level 1b

Hi,

 

Please see attached screenshots of both basic and advanced tabs, no quick setup and i cant find anywhere to bridge the modem which is essential in my application

Moderator

Hi @Bruzza81,

 

Can you try to access the modem/router page using desktop/laptop connected via Ethernet Cable?

 

Some of the  modem/router's feature might not available because it is accessed via wireless (Smartphones)

 

 

Regards,

 

 

 

Level 1b

Sorry I forgot o mention, the smartphone was just snapshot so you could see the screen (it was easier for me!), i have tried this on the PC, the screen is identical.

Moderator

Hi @Bruzza81,

Thanks for the additional info. Try to check the drop down of 'Internet Connection Type' in advanced.

 

Please see attached file for reference.

 bridgemode.png

 

Regards,

 

 

Level 1b

Hi, thank you, i have checked this but i dont see any bridge mode?? Is there maybe a technical name for it?

 

Thanks

Level 1c

Hello,

 

I've just got my NBN fixed wireless installed today.

 

I also need to enable bridge mode (acknowledge VOIP won't work), and I also do not have 'quick setup' available on the Archer VR1600v modem.

 

I wish to use my existing firewall router to perform the PPPoE authentication.

 

Could you please advise ?

 

Cheers