NBN HFC

SOLVED Go to solution
vankhoanguyen
Level 2

Hi,

Does anyone set up TP-Link archer ax50 to NBN HFC successful without the modem provided?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Shane
Moderator

Hi @vankhoanguyen ,

 

Welcome to the community!

 

As long as it a VDSL modem/router it should be compatibly, just follow the settings below.

  • Put a check on the VLANID then set it to 2.
  • Enter your TPG Username and password 
  • The "Internet IP address" should be set to automatic/Dynamic.
  • The transfer mode and DSL mode should be VDSL2/VDSL. (If needed)
  • Multiplexing method should be LLC-Based (if available after you changed the mode to VDSL).
  • Encapsulation should be PPPoE.

Note: VoIP feature will only work using our supplied modem.

Let us know how it will go.

 

Cheers!

 

View solution in original post

1 REPLY 1
Shane
Moderator

Hi @vankhoanguyen ,

 

Welcome to the community!

 

As long as it a VDSL modem/router it should be compatibly, just follow the settings below.

  • Put a check on the VLANID then set it to 2.
  • Enter your TPG Username and password 
  • The "Internet IP address" should be set to automatic/Dynamic.
  • The transfer mode and DSL mode should be VDSL2/VDSL. (If needed)
  • Multiplexing method should be LLC-Based (if available after you changed the mode to VDSL).
  • Encapsulation should be PPPoE.

Note: VoIP feature will only work using our supplied modem.

Let us know how it will go.

 

Cheers!

 

View solution in original post