TPG Community

Get online support

Old phone socket and NBN

SOLVED Go to solution
Patrick1063
Level 2
Hi, needed some advice please. We are in the process of renovating our kitchen where we have the old phone socket (see pics). We will be getting HFC NBN later this year. Will the new NBN line run through the same phone socket line? Do I need to keep this phone socket line or there will be a new line, hence new socket for NBN? Thanks!
3 ACCEPTED SOLUTIONS

Accepted Solutions
orbistat
Level 8

Hi @Patrick1063 HFC flavour NBN is delivered via coaxial cable, usually via a pre existing pay tv type cable, you won't require that existing phone socket, however it may be advantageous to leave the cable there as an option so you can position a cordless base/answering machine in the kitchen for ease of use when the NBN is installed, a UTP cable from the kitchen to wherever the NBN router ends up being will give you that option, leave it in if only as a draw wire for the future and install a blank wall plate at that spot.

View solution in original post

Patrick1063
Level 2
Thanks so much for your advice. Much appreciated. Cheers

View solution in original post

drbob
Level 6

If I were you I would keep the cable or as you are renovating, replace it with a length of CAT6 cable.

I am also with HFC and the modem supplied provides telephony via VOIP and there are two phone ports on the HG659 modem. What you could do is to wire up one of the ports to come to the kitchen, or better still, disconnect house telephone wiring from Telstra line coming in from the street and connet the house phone wiring to a phone port on the modem. That way any existing phone socket can be used to connect to a wired phone.

 

View solution in original post

3 REPLIES 3
orbistat
Level 8

Hi @Patrick1063 HFC flavour NBN is delivered via coaxial cable, usually via a pre existing pay tv type cable, you won't require that existing phone socket, however it may be advantageous to leave the cable there as an option so you can position a cordless base/answering machine in the kitchen for ease of use when the NBN is installed, a UTP cable from the kitchen to wherever the NBN router ends up being will give you that option, leave it in if only as a draw wire for the future and install a blank wall plate at that spot.

Patrick1063
Level 2
Thanks so much for your advice. Much appreciated. Cheers
drbob
Level 6

If I were you I would keep the cable or as you are renovating, replace it with a length of CAT6 cable.

I am also with HFC and the modem supplied provides telephony via VOIP and there are two phone ports on the HG659 modem. What you could do is to wire up one of the ports to come to the kitchen, or better still, disconnect house telephone wiring from Telstra line coming in from the street and connet the house phone wiring to a phone port on the modem. That way any existing phone socket can be used to connect to a wired phone.