TPG Community

UJ2021 · ‎17-05-2021

@david64 That post in SOPHOS community was raised by myself and so far I havent got that much of helpful information from them. I have challenges of accessing the logfile because somewhat reasons the command line interface does not accept my admin password. So I cant download the logfile. This is the first time I am using a SOPHOS box and got a lot to learn. My supplier has helped in setting it up a bit but now having challenges with the FTTN based VDSL connection.

UJ2021 · ‎16-05-2021

@david64 Thanks David, I have tried all things that you have mentioned. There is a small manual came with SFP module, which basically talks about the mounting instructions and basic operations (LED meanings) The XG115 takes the physical port 4 as soon as the SFP module is plugged in. Yes I have edited physical interface : port 4 is PPPoE; zone is WAN. I have also provided credentials. I didnt select the DSL settings under PPPoE (that's where we have to select VDSL and VLAN ID for the ISP). I also have added a VLAN interface: port 4, zone WAN, VLAN ID 2, IP assignment DHCP Still it is not establishing the connection.

UJ2021 · ‎16-05-2021

@david64 I am using SOPHOS SFP module along with XG115. When I purchased the XG115, i was told by the supplier that SFP module will help to connect the RJ11 connection that brings the NBN FTTN connection (aka VDSL or similar to ADSL2+) to the XG115. XG115 got a special slot where we have to plug the SFP module. Then it takes over the physical PORT 4 from the XG115 to work with SFP module

UJ2021 · ‎15-05-2021

Hi David64 I am using FTTN NBN connection, that means it is pretty much same as ADSL2+, the last mile is copper and RJ11 cable connects to the modem/router (in this case HG659 of Sophos XG115). The gateway field name is blank and it is not a mandatory field in XG115. I suspect that it would have set by default in the HG659 (modem/router) because it was provided by TPG. I have already reached out to Sophos community too.

UJ2021 · ‎14-05-2021

Hi David Thanks for the info. I have tried the said all info (username@tpg.com.au and pw with VLAND ID=2 on the WAN interface). However the connection is not getting established. Attached in the interface info that i see on SOPHOS and current router.

UJ2021 · ‎14-05-2021

I want to change my current VDSL Modem/Router and installed a devices which got firewall. The new devices got PPOE configuration point. I have already provided my user name and password at there but i am still not getting the WAN link up. Can you please advise what information from my TPG connection that I have to use? I have use the user name and password that I currently use to login to TPG Internet. Yesterday I check with this forum and i was told that, the credentials used in the Modem/Router is same as the Internet Login. How do i Know which VLAN is used in current Modem Router? My current Modem/Router is Huawei HG659 and I am going to use SOPHOS XG115. An early answer and guidance is highly appreciated.

UJ2021 · ‎13-05-2021

Does the password used within the modem same as password used to login to TPG account on the public website?

TPG Community

About UJ2021

Re: VDSL Configuration

Re: VDSL Configuration

Re: VDSL Configuration

Re: VDSL Configuration

Re: VDSL Configuration

VDSL Configuration

VDSL Connection Password