TPG Community

Get online support

How to set up your TP-Link Archer AX10 BYO router NBN

BasilDV
Moderator

The TP-Link Archer AX10 router can be used for NBN FTTP,  Fixed Wireless,  FTTC and HFC technology.

 

51ax8peHlPL._AC_SX679_.jpg

 

 

This article provides router setup advice for NBN services to get you up and running in just a few simple steps:

 

 

 

 

 

 

 

 

 

 Physical Connection

 

1. Ensure your NBN Connection Box (NTD/NCD) is turned on.

 

2. Plug an Ethernet cable from the designated UNI-D / Yellow gateway port on your NBN Connection Box into the blue WAN port of your TP-Link router. An email with the provisioned UNI-D port number will be sent to you once service installation date has been confirmed.

 

backWAN.jpg

 

 

3. Plug in the power cable and turn your TP-Link router on using the Power button.

 

backPower.jpg

 

 

4. Once the Power and WAN light are on, then you may proceed with the router configuration.

 

Back to Top

 

 

 

 

 Configuration via Quick Setup

 

1. Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.

 

2. Open a web browser (Chrome, FireFox, Safari, etc) and manually key in the wireless router’s default IP address: 192.168.1.1 or enter http://tplinkmodem.net.

Create a strong password and click Let’s Get Started to log in.

 

Browserlogin.jpg

 

3. Select your Time Zone, then click next

 

QSTimezone.jpg

 

 

4. Select PPPoE for your connection type, then click next

 

QSPPPoE.jpg

 

5. Enter your TPG username and password, then click next

 

QSUnPW.jpg6. Personalise your Wireless network by changing the SSID and Password

 

QSWireless.jpg

 

 

7. Wait for the Connection test result, once it’s a success, then click on next to save it. Internet should start working once done

 

QSTest.jpg

 

Back to Top

 

 

 

 

 Manual Configuration (If needed)

 

1. Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.

 

2. Open a web browser (Chrome, FireFox, Safari, etc) and manually key in the wireless router’s default IP address: 192.168.1.1 or enter http://tplinkmodem.net.

 

Create a strong password and click Let’s Get Started to log in.

 

Browserlogin.jpg

 

 

3. Click on the Internet tab and from the internet connection type drop-down list, select the option PPPoE

 

ManualPPPoE.jpg

 

 

4. Enter your TPG username and Password

 

ManualUNPw.jpg

 

5. Click Save when done

 

 

Back to Top

 

 

 Wireless network configuration

 

1. Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.

 

2. Open a web browser (Chrome, FireFox, Safari, etc) and manually key in the wireless router’s default IP address: 192.168.1.1 or enter http://tplinkmodem.net. Log in using the administrator username and password.

 

3. Click the Wireless tab, then change the SSID and Password for your WiFi network.

 

ManualWireless.jpg

 

 

4. Click Save when done.

 

Back to Top

 

 

If you still need further support, please call us on 1300 997 271.

 

 

Related TPG Community Articles:

 

List of Non-TPG supplied Modem/Routers for use with TPG NBN BYO Data Only Plans
High-Speed NBN BYO Modem Requirements
TPG NBN Home Superfast & Home Ultrafast Plans are here

NBN Plans with BYO modem – How to Connect Using your Own Compatible Modem/Router

NBN Plans with BYO modem – How to Configure Using your Own Compatible Modem/Router

Easy Steps to Improve Wi-Fi Connection In Your Home

List of all TPG broadband setup and modem guides on Community