Hi @shettyraghu07,
Welcome to the Community!
If you have previously used this modem for ADSL2+ service and it is not lock to Belong's network, then it should work and all you need to do is configure the modem by following settings:
- Username: <Your TPG username>
- Password: <Your TPG Account Password>
- Protocol / Encapsulation / Connection Type: PPPoE(sometimes, you'll have PPPoE LLC)
- Authentication Method: PAP
- Modulation: ADSL2+
- VPI/VCI: 8 / 35
You may also check out our Community article regarding Setting up ADSL2+ and modem configuration.
Let us know should you need further assistance.
