PING from my dynamic ip disabled?

[Anonymous]

Hi @shamhat_the_2nd,

You will need to configure the 3rd party modem/router's username and password to get it authenticated.

You can visit this article about How to setup ADSL2+ for more reference.

Let me know should you require further assistance.

Cheers!

[shamhat_the_2nd]

Hi TPG

We have replaced the CPE router with a Netgear D7000 and will monitor smokeping.  As I am not often home, I'm trying to create a script that invokes the traceroute script I mentioned earlier whenever latency exceeds a certain value.

Regards

some typical DNS spikessome typical DNS spikes

Shamhat the 2nd

[Riezl]

Thanks for keeping us posted, @shamhat_the_2nd.

Feel free to contact us should there be any issues. Thank you.

[shamhat_the_2nd]

Hi Shane

There is currently somekind of event affecting the network and I am watching it unfold via smokeping.

I've finally managed to capture a traceroute to all of the targets that my server looks at and have sent you them along with traceroutes to the same destinations.

Please take a look.

Regards

Shamhat

[Anonymous]

Hi @shamhat_the_2nd,

Thanks for sending us your details.
 

I ran initial test on your service and it is currently connected for 3d 21h 39m.

Can you turn off the modem for 3-5mins.

Once it's turned off let me know and I will run additional test.

Cheers!

[shamhat_the_2nd]

Have just turned router off.

[Anonymous]

Hi @shamhat_the_2nd,

Thanks. I will let you know when to turn it back on.

I'll get back to you shortly.

Cheers!

[Anonymous]

Hi @shamhat_the_2nd,

You can turn it back on now and let me know if you will still experience latency issue for the next 24hrs.

Cheers!

[shamhat_the_2nd]

Thanks for looking at it Shane

We will continue to monitor.

Regards

Shamhat_the_2nd

[Anonymous]

You're always welcome @shamhat_the_2nd!