Get online support
I got FTTB plan. I am using my own modem which is TP-link Archer VR400. I followed the guideline but I am not able to connect to internet. I have light on the modem for DSL. I just got the message from TPG that installation is complete. I'm not sure what is the missing piece. On the modem GUI, internet connection is disconnected. Appreciate the help.
Hi @nathua,
You may check these articles for reference:
Otherwise, please PM us with your Customer ID or username so we can check the status of your line.
Thanks!
Ahra_G
Hi@Ahra_G
I PM'd you the username. I also checked the links. I'm doing the exact guideline. That'd be awesome if we can confirm that the line is fine.
Just one thing to confirm regarding the username, I used "@TPG.com.au" suffix for the username. Basically <TPG_Username>@TPG.com.au and TPG password that I used to log in the tpg website.
Hi @nathua . You can try your username with and without suffix.
The username and password are the ones you use to login to MyAccount.
Is your plan the bundled NBN/VOIP plan, or BYO data only plan (no VOIP)?
The DSL light means it is getting the signal from the FTTB equipment.
If it is not connecting, there might be a clue in the VR400 system log.
Ok I found the issue.
Thanks to this guideline How-to-set-up-your-TP-Link-AC1200-Wireless-MU-MIMO-Archer-VR400 written by @BasilDV . This is much better guideline than the other one.
The key was to disable VLAN. I got confused on this guideline https://support.tpg.com.au/how-set-tp-link-archer-vr400-nbn-fttbn
Disabling VLAN resolved my problem and connected to the internet.
Thanks @BasilDV for the help
Glad that the article we've created has helped you resolve this issue.
Have a good day!
BasilDV