DSL-AX82U setup

SOLVED Go to solution
david64
Master

@67duff . With FTTP, VLAN ID is not used. 

WAN Internet connection screen.  Edit Index 0, Disable 802.1Q.

802.1Q
• Enable: Select Yes to enable VLAN and set the VLAN ID provided by your IPTV service provider.

 

Can you check the config on old router for VLAN ID.

67duff
Level 3
David!!!

Thank you very much!!!
Disabled 802.1Q and set 802.1P to 1.
Suddenly it all came good. I’d been pulling my hair out for two days
dmatrone
Level 2
Hi
I just purchased the same modem today and am having the same issue, WAN light is red on the modem, when replacing with a working modem. Connected to the NBN box.

I tried disabling dual WAN and set it to WAN primary.
802.1q is disabled and I set 802.1P to 1, and set VLAN ID to 2, and set WAN connection type to PPOE as per your picture.

Can you please send me a pic of your settings screen, so I can check if the rest match.
Also is there anything else I need to do? Thanks been trying to get it working all day!

Appreciate your help
david64
Master

Hi @dmatrone . Are you on FTTP connection?

Which NBN plan do you have? NBN50, NBN100 or faster? Bundled NBN/VOIP or Data only? 

Anonymous
Not applicable

Hi @dmatrone ,

 

Could you flick me a message with your details to better understand the situation and see what modem settings we need for the internet to work?

 

How to send a PM? 

 

Regards,

 

Hi
I just purchased the same modem today and am having the same issue, WAN light is red on the modem, when replacing with a working modem. Connected to the NBN box.

I tried disabling dual WAN and set it to WAN primary.
802.1q is disabled and I set 802.1P to 1, and set VLAN ID to 2, and set WAN connection type to PPOE as per your picture.

Can you please send me a pic of your settings screen, so I can check if the rest match.
Also is there anything else I need to do? Thanks been trying to get it working all day!

Appreciate your help

roar_09
Level 2
Hi, Im having the exact same issues. Modem worked on previous connection but have had FTTP connected today (100, was 50 previously). Changed settings as per these posts and has gone from saying cable unplugged to disconnected. Hoping to see full settings to compare. Thanks Smiley Happy
kate_
Moderator

Hey @roar_09, we'll help get your modem connected.

 

If you can send me a private message, we will check the error and get you back online ASAP.